Flotex
Home > Flotex > General Information
X

Taking Care of you Flotex

Cleaning

When vacuuming, set the brush adjustment to the lowest setting, push forward at normal speed and pull back at half speed. This gives the brush time to sweep out any fluff etc that may have been pushed between the fibres.
 

Wet Cleaning

Flotex benefits from the occasional wet clean. This can be carried out with a machine such as Vax or hot-water extraction machine. The detergent supplied with these machines is suitable for use on Flotex. However, it should only be used in a very week solution. Mopping or wiping is not recommended as this only cleans the tips of the pile.
 

Dealing with Spillages


 

Warning

Flotex can be permanently damaged by strong acids, strong alkalis, some solvents or materials containing them. It can also be stained by dyes, foodstuffs and other materials containing dyes or strong colorants. Bleach and substances containing bleach, oxidising and reducing agents may also damage and/or decolourise Flotex.

Damage may be minimized by immediately diluting the spillage with water, then removing with an absorbent material or extraction machine. Urine can also stain Flotex if not cleaned effectively.
 

Vinyl Carpet Protector

Not recommended, can damage Flotex.
 

Burns

Cigarette or other hot object can melt the nylon pile, resulting in permanent damage. Repairs are possible. Call 01773 740603 for details.
 

Clean Away

As easy as scrape, scrub, rinse.

Stage 1: SCRAPE
Scrape off as much of the spillage as possible.

Stage 2: SCRUB
Pour a liberal amount of hot water onto the area. Add a small amount of detergent (approximately one teaspoon of detergent to five litres of water). Then scrub using a stiff brush and scrape the dirty solution into an absorbent cloth.

Stage 3: RINSE
Rinse thoroughly with clean water. Scrape the excess water into an absorbent cloth and leave to dry.

View the Flotex range