Surestep Original Safety Vinyl by Forbo - Offering colourful design, Surestep Original offers a good increase in slip resistance, with excellent maintenance properties and high durability because of the inclusion of quartz and carborundum. Original can be installed in all general purpose areas requiring an R10 slip resistance, and it can be easily maintained due to its unique PUR Pearl™ surface. This affordable 2mm thick vinyl is available in a 2m wide roll and comes with a 10 Year Manufacturers Warranty. It has a 0.7mm wear layer making the vinyl very hard wearing - colour matching weld rods are also available from us.
"This durable particle enhanced non-slip floor covering consists of 33 colours in various colour tones, allowing you to play with different colour schemes in your floor design".
- 10 Year Manufacturers Warranty - British made quality
- R10 Slip Resistant - 2.00mm thick & highly durable
- 0.7mm wear layer
- All Step safety floors are finished with PUR Pearl or PUR coating, providing exceptional stain, scratch and chemical resistance and superior appearance retention
- Easy to keep clean - A high quality safety floor at an affordable price
- Available in 2m wide roll - Commercial rated
- Meets the requirements for healthcare, HSE, education & catering environments
- Cost effective safety flooring
- Safety vinyl flooring with guaranteed lifetime slip resistant performance, created with slip resistant particles throughout the matrix
Want a smaller or cheaper cut of Commercial Flooring? Click HERE
Maintenance
The frequency of regular cleaning method will depend on the amount of traffic, soiling levels, desired appearance, and hygiene standards.
• Remove dust and loose dirt by vacuum cleaning or sweeping.
If required:
• Manual Cleaning – Scrub with a neutral floor cleaner and a suitable scrubbing brush/mop. Remove dirty water with a wiper and mop. Rinse with clean water and allow the floor to dry.
• Machine Cleaning - A neutral floor cleaner in conjunction with a combined scrubber drier or rotary machine (150-180 rpm) with a suitable brush* or a cylindrical brush machine will produce best results on larger areas. Rinse with clean water when necessary and allow the floor to dry.
*Note: For rotary machines and scrubber driers standard brushes should be used on Safestep R11 and R12. Soft brushes should be used on Safestep Aqua. Cylindrical brush machines with equivalent brushes may be used as an alternative