Recommended Professional's Choice - LOWEST ONLINE PRICE - Bostik WOOD H180 CLASSIC-P is a high-performance, permanently elastic, single component hybrid MS Polymer adhesive for surface bonding most types of wooden floors. With rapid fixing, strong ultimate cohesion and low VOC emissions (EC1), Bostik WOOD H180 CLASSIC-P can be used with solid wood types, wood block, wood mosaic panels and strip parquet flooring up to 180mm wide, and engineered wood flooring up to 300mm wide. MS Polymer is a one-part, modified silane-based flexible wood flooring adhesive. Available here in a 14kg bucket, the adhesive can be bonded onto concrete, wood, metal decking, ceramic tiles and anhydrite screed. It is also suitable for use with warm water underfloor heating systems where the floor surface temperature does not exceed +27°C.
In addition, the product has very low volatile organic compound emissions (EC1), meaning it is safer for installers and less impactful on building occupants during the installation.
Application - Bostik H180 MS Polymer adhesive should be applied on to an even, dry and smooth surface which is free from any irregularities and cracks. Any old adhesive remains should be removed / scraped away as they could affect the adhesion. Any loose or damaged surfaces must be repaired before the adhesive is applied.
Before use bring the the adhesive to room temperature. Apply the adhesive to the surface with a suitable v-notched trowel (also available from us) making sure not to apply any more then can be covered within 20 minutes. Slide the wooden flooring onto the adhesive layer and tap into place using a rubber hammer. Adding weights on top of the oak boards will improve the overall bond strength.
You do not have any samples in your basket.